309
Programming Manual
Program 44: ARS/F-Route Setup
44-05: ARS/F-Route Table
SA
SB
IN
Description
Use Program 44-05 : ARS/F-Route Table to set the ARS/F-Route table. There are 4 kinds of order. If the higher
priority trunk groups are busy, the next order group will be used. If a lower priority route is selected, the caller may
be notified with a beep tone.
Input Data
ARS/F-Route Table Number
1-500
Priority Number
1-4
Prog. No. Item Input Data Default
Related
Program
44-05-01
Trunk Group Number 0 : (0 : No setting)
1-25 : Trunk Group Number
255 : (Extension Call)
0
44-05-02
Delete Digits 0-255(0 : No setting,
255 : Delete All digits)
0
44-05-03
Additional Dial Number 0-1000
0
44-05-04
Beep Tone 0 : Off
1 : On
0
44-05-05
Gain Table Number for Internal Calls 0-500
(0 : No setting)
0
44-05-06
Gain Table Number for Tandem
Connection
0-500
(0 : No setting)
0
44-05-07
ARS Class of Service 0-16
0
44-05-08
Dial Treatment 0-15
0
Conditions
None
Feature Cross Reference
Automatic Route Selection(ARS)/F-Route
To Next Page
Loading...
