178
Programming Manual
Program 21: Outgoing Call Setup
21-09: Dial Block Setup
IN
SA
SB
Description
Use Program 21-09 : Dial Block Setup to defines the Dial Blocking Toll Restriction Class and Dial Block
Password to be used by the Supervisor extension.
Input Data
Prog. No. Item
Input Data Default
Related
Program
21-09-01
Toll Restriction Class With Dial Block
Assign a Toll Restriction Class of Service when the
Dial Block feature is used.
1-15
1
21-09-02
Supervisor Password
Assign a 4-digit password to be used by the supervisor
to enable or disable Dial Block for other extensions.
0-9,*,#
4-digits Fixed
No setting
Conditions
This function works by password and Class of Service control (the supervisor is not an assigned extension). If Dial
Block is available for all Classes of Service, everyone may become a supervisor if they know the Dial Block
password.
Feature Cross Reference
Toll Restriction
Telephone Programming Instructions
To enter data for Program 21-09(Dial Block Setup):
1. Enter the programming mode.
2. Enter 21 09
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
21-09-01
Dial Block T/R1
21-09-xx
xxxxx
To Next Page
Loading...
