NEC Aspila Topaz - 20-26: Multiplier for Charge Cost

164
Programming Manual
Program 20: System Option Setup
20-26: Multiplier for Charge Cost
IN
SA
SB
Description
Use Program 20-26 : Multiplier for Charge Cost to define the amount that the Network charge units will be
increased by.
Input Data
Class of Service Number01-15
Prog. No. Item Input data Default
20-26-01
Percentage to multiply the unit charge 100-500% 100
Conditions
None
Feature Cross Reference
 Station Message Detail Recording (SMDR)
Telephone Programming Instructions
To enter data for Program 20-26(Multiplier for Charge Cost):
1. Enter the programming mode.
2. Enter 20 26
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
20-26-01SvcCls1
V
alue 100
20-26-xxSvcClsxx
xxxxx