237
Programming Manual
Program 25: DID/DISA Setup
25-09: Class of Service for DISA Users
SA
SB
IN
Description
Use Program 25-09 : Class of Service for DISA Users to set the DISA Class of Service for each user. When a
DISA caller enters a password (defined in Program 25-08), the system identifies the user and associates the
appropriate DISA Class of Service with the call. Assign the DISA Class of Service options in Program 20-14. When
programming DISA Class of Service, you make one entry for each Night Service mode.
Input Data
DISA User Number
1-15
Day/Night Mode Class of Service Default
1-8 1-15 1
Conditions
1) The DISA Class of Service cannot be 0.
2) You cannot use Program 20-06 to assign Class of Service to DISA trunks.
Feature Cross Reference
Direct Inward System Access (DISA)
Telephone Programming Instructions
To enter data for Program 25-09(Class of service for DISA Users):
1. Enter the programming mode.
2. Enter 25 09
3. Enter the number of the item you want to program.
4. Select the DISA User number to be programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼
keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
25-09-01DISA-U1
Mode1 Class 1
25-09-xxDISA-
Uxx
To Next Page
Loading...
