288
Programming Manual
Program 35: SMDR and Account Code Setup
35-05: Account Code Setup
IN
SA
SB
Description
Use Program 35-05 : Account Code Setup to set various Account Code options for an extension’s Class of Service.
Assign a Class of Service to extensions in Program 20-06.
Input Data
Class of Service Number
1-15
Prog. No. Item Input Data Default
Related
Program
35-05-01
Account Code Mode
Use this option to select the Account
Code Mode (0-3).
0 : Account Codes disable
1 : Account Codes optional
2 : Account Codes required
but not verified.
3 : Account Codes required
and verified.
0
35-05-02
Forced Account Code Toll Call
Setup
Use this option enable Account Codes
for all calls or just toll calls (for mode 2
or 3in Item 01 above).
0 : Account Codes for toll
and local calls
1 : Account Codes just for
toll calls.
0
35-05-03
Account Codes for Incoming Calls
Use this option to allow users to enter
Account Codes for incoming calls. If
disabled, any codes entered dial out on
the connected trunk.
0 : Account Codes for
Incoming calls disabled.
1 : Account Codes for
Incoming calls enabled.
0
35-05-04
Hiding Account Codes
Use this option to either hide or show
the Account codes on a telephone’s
display.
0 : Account Codes displayed
1 : Account Codes hidden
（”*” is displayed）
0
Conditions
None
Feature Cross Reference
Account Codes
To Next Page
Loading...
