NEC Aspila Topaz - Page 108

100
Programming Manual
Program 15: Extension Basic Setup
15-02: Multi-Line Telephone Basic Data Setup
IN
SA
SB
COP
Y
Input Data(Cont’d)
Prog. No. Item Input data Default
Related
Program
15-02-11
Callback Automatic Answer
Use this option to enable or disable
automatic answer for Callback.
If enabled, extension automatically
Answers Callback ringing when user lifts
the Handset.
If disabled, user must press line appearance
key to answer Callback.
0 : Off
1 : On
1
15-02-12
Off Hook Signaling
Use this option to set the keyset’s
Off Hook Signaling. Off Hook Signaling
occurs when a keyset user receives a second
call while busy on the Handset Call. To
enable/disable Off Hook Signaling for an
extension’s Class of Service
0 : Muted Off Hook Ringing
1 : No Off Hook Ringing
2 : Not Used
3 : 1 beep tone on Speaker
4 : 1 beep tone on Handset
0
15-02-13
Redial List Mode
Select whether the Redial List feature
should store internal and external numbers
(0), or only external numbers (1).
0 : Extension/Trunk Mode
1 : Trunk Mode
1
15-02-14
-Not Used- -
-
15-02-15
Storage of Caller-ID for answered call
0 : Disable
1 : Enable
1
15-02-16
Handsfree Operation
0 : Disable
1 : Enable
1
15-02-18
Power Saving Mode
0 : Normal Mode
1 : Power Saving Mode
1
15-02-19
-Not Used- -
-
15-02-20
-Not Used- -
-
15-02-21
Virtual Extension Access Mode
(when idle Virtual Extension Key
pressed)
Determine whether an extension’s
Virtual Extension/Call Coverage
Key should be for placing and
receiving calls (0), or just receiving
incoming calls (2).
0 : DSS(Inbound/Outbound)
1 : Outgoing
2 : Ignore Key(Inbound)
2
15-02-22
Multiple Incoming Call from Intercom
and Trunk
0 : Disable
1 : Enable
1
15-02-23
Abbreviated dial Preview Mode 0 : Preview
1 : Outgoing immediately
0
15-02-24
-Not Used- -
-
15-02-25
-Not Used- -
-
15-02-26
-Not Used- -
-