NEC Aspila Topaz - Page 111

103
Programming Manual
Program15: Extension Basic Setup
15-03: Single Line Telephone Basic Data Setup
IN
SA
SB
COP
Y
-External Line Reverse & Internal Line Reverse-
Conditions
None
Feature Cross Reference
 Single Line Telephone, Analogue
Telephone Programming Instructions
To enter data for Program 15-03(Single Line Telephone Basic Data Setup):
1. Enter the programming mode.
2. Enter 15 03
3. Enter the number of the item you want to program.
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
15-03-01 TEL200
SLT Method 1
15-03-xx TELxxxx
xxxxx
Outgoing Call Idle
Incoming Call
Call Pickup
Normal
Normal
Normal
Idle
Idle
Idle
Reverse
Reverse
Reverse
(1) (2) (3) (4) (5)
(2) Off-Hook
(6) Calling/Ringing
(7) Answer
(8) Detect Hang Up
(9) On-Hook