NEC Aspila Topaz - Page 118

110
Programming Manual
Program 15: Extension Basic Setup
15-07: Programmable Function Keys
IN
SA
SB
COP
Y
Input Data(Cont’d)
Function
Number
Function Additional Data LED Indication
71
Change Attendant
Message(DSPDBU)
Extension Number or
Pilot Number
(Max.4 digits)
None
72
-Not Used- - -
73
-Not Used- - -
74
-Not Used-
-
-
75
-Not Used-
-
-
76
Toll Restriction in Credit Extension Number
(Max.4 digits)
77
-Not Used- - -
78
-Not Used- - -
79
-Not Used- - -
80
Tandem Ring Setup Key (Max.4 digits) Red On : Master Side
81
Automatic Transfer to
Transfer Key
Trunk Line No.1-51 Red On : Set
2. Appearance Function Level (*00-*99)
Function
Number
Function Additional Data LED Indication
*00
Not used
*01
Trunk Key Trunk Number 1-51
*02
Trunk Group/ Loop Key Trunk Group Number
01- 25
*03
Virtual Extension Key Extension Number. or
Department Group
Number (Max.4 digits)
*04
Park Hold Key Park Number 01-64
*05
Hybrid Operation Key(Loop
key)
0-2
0 : Incoming
1 : Outgoing
2 : Both
Conditions
When a key is programmed using service code 852, that key cannot be programmed with a function using the 851
code until the key is undefined (000).
Feature Cross Reference
Refer to chart above