120
Programming Manual
Program 15: Extension Basic Setup
15-13: Loop Keys
IN
SA
SB
COP
Telephone Programming Instructions
To enter data for Program 15-13(Loop Keys):
1. Enter the programming mode.
2. Enter 15 13
3. Enter the number of the item you want to program.
4. Select the Extension number to programmed by pressing the FLASH or the VOLUME▲ or VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
15-13-01 TEL200
OTG KY01 = 0
15-13-xx TELxxxx
xxxxx
To Next Page
Loading...
