NEC Aspila Topaz - Page 155

147
Programming Manual
Program 20: System Option Setup
20-13: Class of Service Options (Supplementary Service)
IN
SA
SB
Input Data(Cont’d)
Prog. No. Item Input Data Default*
Related
Program
20-13-31
Connected Line identification (COLP) 0
20-13-32
Deny Multiple Barge-In
Enable (1) or disable (0) the extension’s ability to have
multiple user’s Barge In to their conversation.
0
20-13-33
-Not Used- -
20-13-34
Block Manual Off-Hook Signaling
Enable (1) or disable (0) an extension’s ability to block
off-hook signals manually sent from a co-worker.
0
20-13-35
Block Camp-On
Enable (1) or disable (0) an extension’s ability to block
callers from dialing 2 to Camp On.
0
20-13-36
Call Timer
In an extension’s Class of Service, enable (1) or disable
(0) an extension’s ability to use the Call Timer.
1
20-13-37
-Not used- -
20-13-38
Headset Ear Piece Ringing
0 : Off
1 : On
0
*All Classes are above mentioned default value.
Conditions
None
Feature Cross Reference
 Class of Service
Telephone Programming Instructions
To enter data for Program 20-13(Class of Service Options (Supplementary Service)):
1. Enter the programming mode.
2. Enter 20 13
3. Enter the number of the item you want to program.
4. Select the Class of Service number to be programmed by pressing the FLASH or the VOLUME or
VOLUME keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
20-13-01 F-Cls1
Long Conv Alarm1
20-13-xx F-Clsxx
xxxxx