NEC Aspila Topaz - Page 179

171
Programming Manual
Program 21: Outgoing Call Setup
21-05: Toll Restriction Class
SA
SB
IN
Input Data(Cont’d)
Prog. No. Item Input Data Description
Related
Program
21-05-12
PBX Call Restriction 0 : Disable
1 : Enable
Use this option to set how the system Toll
Restricts calls over PBX trunks. If you
enable PBX Toll Restriction, the system
begins Toll Restriction after the PBX
access code. The user cannot dial a PBX
extension. If you disable PBX Toll
Restriction, the system only restricts calls
that contain the PBX access code. The
system does not restrict calls to PBX
extensions. Refer to the PBX
compatibility feature. Make sure Program
21-05-04 (Maximum Number of Digits
Table Assignment) allows for PBX Toll
Call Dialing (normally 12 digits).
21-05-13
Restriction of Tie call 0 : Disable
1 : Enable
It chooses whether the toll restriction of
the dial set up by 34-08 is enabled or
disabled.
34-08
Default
Programming No.21-05-
Class
01 02 03 04 05 06 07 08 09 10 11 12 13
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
0000000000000
Conditions
None