NEC Aspila Topaz - Page 340

332
Program 81: Basic Hardware Setup for Trunk
81-01: Analogue Trunk Initial Data Setup
Programming Manual
IN
SA
SB
Input Data(Cont’d)
Prog. No. Item Input Data
Default
81-01-27
Pulse Dial Break Time (10pps)
1-255 (8-2040mS)
13(104ms)
81-01-28
Pulse Dial Make Time (10pps)
1-255 (8-2040mS)
7(56ms)
81-01-29
Inter-digit Time (10pps)
1-255 (32-8160mS)
19(608ms)
81-01-30
Pulse Dial Break Time (20pps)
1-255 (8-2040mS)
6(48ms)
81-01-31
Pulse Dial Make Time (20pps) 1-255 (8-2040mS) 4 (32ms)
81-01-32
Inter-digit Time (20pps) 1-255 (32-8160mS) 16 (512ms)
81-01-33
Charging Pulse Minimum Duration Time 1-255 (8-2040mS) 9 (72ms)
81-01-34
Charging Pulse Minimum Period Time 1-255 (8-2040mS) 29 (232ms)
81-01-35
Charging Pulse Minimum Interval Time 1-255 (8-2040mS) 6 (48ms)
Conditions
None
Feature Cross Reference
 Central Office Calls, Placing
Telephone Programming Instructions
To enter data for Program 81-01 (Analogue Trunk Initial Data Setup):
1. Enter the programming mode.
2. Enter 81 01
3. Enter the number of the item you want to program.
4. Enter data for the item you selected + HOLD.
5. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
81-01-01
Compand'n Type0
81-01-xx
xxxxx