NEC Aspila Topaz - Page 83

75
Programming Manual
Program 12: Night Mode Setup
12-07: Text Data for Night Mode
SA
SB
IN
Telephone Programming Instructions
To enter data for Program 12-07(Text Data for Night Mode):
1. Enter the programming mode.
2. Enter 12 07
3. Enter the number of the item you want to program.
4. Select the Night Mode Service Group number to be programmed by pressing the FLASH or the VOLUME▲ or
VOLUME▼ keys.
5. Enter data for the item you selected + HOLD.
6. Enter data for the next item in the program.
OR
Press DC once to enter a new item number.
OR
Press DC until you’ve exited that series’s programming section.
12-07-01ModeGrp1
M1 -
12-07-
xxModeGrpx