NEC UNIVERGE NEAX 2000 IPS - Page 124

– 100 – NWA-008844-001 Rev.5.0
91ch3001.fm
COMMAND CODE
TITLE:
BASIC SERVICE FEATURES
08
: Initial Data
BASIC SERVICE FEATURE SETTING DATA
180 Ringing cadence on Automated Attendant call, DID call and
Remote Access to System call
[Other than North America]
0
1
Special Ringing
See CM08>397
As per CM35 Y=33 or CM76 Y=22
Ringing cadence on Automated Attendant call, DID call and
DISA call
[North America Only]
0
1
0.4 seconds ON-0.2 seconds OFF
-0.4 seconds ON-2 seconds OFF
As per CM35 Y=33 or CM76 Y=22
181 D
term
/DSS Console One-Touch key calling while another party
being rung, or while talking with another party
0
1
Not available
Available
185 When the transferring station goes on-hook before the called
station answers for Call Transfer-All Calls service, if the trans-
ferred call remains unanswered for a preprogrammed duration,
the transferring station is recalled.
Recall timing: See CM41 Y=0>07
0
1
Not available
Available
187 Recall priority over Call Forwarding 0
1
Recall is higher
Call Forward is higher
193 Sender prepause for C.O. outgoing call
(Not used with LCR)
0
1
To provide
Not provided
194 Sender prepause for Tie Line outgoing call 0
1
To provide
Not provided
199 Line Preselection on a D
term
Speaker key is required after pressing the desired Line/Trunk
key.
0
1
Not required
Required
Continued on next page
JUNE/01/2007
CM08