– 353 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK ROUTE DATA
35
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
24 DTMF Inter-digital pause 0
1
2
3
4
5
6
7
32 ms.
64 ms.
80 ms.
96 ms.
160 ms.
192 ms.
240 ms.
128 ms.
25 DP Make Ratio 0
1
39 % Make Ratio
33 % Make Ratio
26 DTMF signal width 0
1
64 ms.
128 ms.
28 Outgoing Trunk Queuing 0
1
Not allowed
Allow
CM15 Y=02
32 Distinctive LED indication
on D
term
during external
incoming call termination
0
1
Green (120 IPM)
Red (120 IPM)
CM08>137
NOTE: The LED indication for an internal incoming call is red (120 IPM flashing). For indicating the termi-
nation of transferred external incoming call, the flashing LED color depends on CM08>137.
33 Interval of ringing signal to
station on incoming calls
[Other than North Amer-
ica]
0
1
2
3
Ringing NOTE
Special Ringing
Internal Ringing
External Ringing
CM08>397
NOTE: For SLT, Internal Ringing is applied. For D
term
, Special Ringing; 0.5 seconds ON-0.5 seconds OFF
[For Australia/Asia/Africa/Europe/Latin America/Middle East/Russia] or 0.25 seconds ON
-0.25 seconds OFF-0.25 seconds ON-0.25 seconds OFF [For EU] is applied.
Continued on next page
See CM08>397
NOVEMBER/15/2006
CM35
To Next Page
Loading...
