– 375 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK ROUTE DATA
35
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
267 Coding Type when sending
the ISDN Connected Line
Identification Presentation
(COLP)
[For Spain]
[Series 3600]
0
1
Codeset 5 (Spanish specification)
Codeset 0 (ETSI specification)
268 Calling Party Name sending
to ISDN
[North America Only]
[Series 3600]
0
1
To provide
Not provided
270 Dial Tone (DT) sending to
calling party of opposite
office when receiving the
SETUP ACK message by
Overlap Sending-Q-SIG
[Russia Only]
[Series 3600]
0
1
2
3
To send DT of own office
To send DT of own office when the received
Progress Description is not same as the Progress
Description assigned by CM35 Y=271
(Not sent when Progress Description is same as
the Progress Description)
To send DT from opposite office
(Not sent when DT is not sent from opposite
office)
Not sent
NOTE: This command should be assigned to outgoing trunk route.
271 Progress Description by
Overlap Sending-Q-SIG
[Russia Only]
[Series 3600]
1
4
8
15
Progress Description 1
Progress Description 4
Progress Description 8
No data
CM35 Y=270
NOTE 1: This command is effective when the second data of CM35 Y=270 is set to “1”.
NOTE 2: This command should be assigned to outgoing trunk route.
Continued on next page
~
~
JANUARY/20/2006
CM35
To Next Page
Loading...
