– 376 – NWA-008844-001 Rev.5.0
91ch3003.fm
COMMAND CODE
TITLE:
TRUNK ROUTE DATA
35
: Initial Data
Y SETTING DATA
RELATED
COMMAND
No. MEANING DATA MEANING
272 Progress Description by
Overlap Receiving-Q-SIG
[Russia Only]
[Series 3600]
1
4
8
15
Progress Description 1
Progress Description 4
Progress Description 8
No data
CM35 Y=244
NOTE 1: This command is effective when the second data of CM35 Y=244 is set to “0”.
NOTE 2: This command should be assigned to incoming trunk route.
273 Sending the called party
number to outgoing trunk
route before receiving all
digits of the called party
number in tandem connec-
tion (Q-SIG to Q-SIG)
[Russia Only]
[Series 3600]
0
1
To send
Not sent
NOTE: This command should be assigned to incoming trunk route of tandem office.
276 ISDN Alternative Routing
for Remote PIM in survival
mode when receiving trunk
call
[Series 3700 R12.2]
0
1
Allow
Restricted
277 Call Completion to Busy
Subscriber (CCBS) for a call
originating office
[For EU]
[Series 3700 R12.2]
0
1
Allow
Restricted
278 Call Completion to Busy
Subscriber (CCBS) for a call
termination office
[For EU]
[Series 3700 R12.2]
0
1
Allow
Restricted
Continued on next page
~
~
NOVEMBER/15/2006
CM35
To Next Page
Loading...
