– 506 – NWA-008844-001 Rev.5.0
91ch3005.fm
COMMAND CODE
TITLE:
LOCATION DATA ASSIGNMENT
67
: Initial Data
Y 1ST DATA 2ND DATA
RELATED
COMMAND
No. MEANING DATA MEANING DATA MEANING
02 PAD data between
location group
[Series 3200
R6.2 (R6.2)]
XX ZZ XX: Location
number of
group (00-63)
ZZ : Location
number of
group (00-63)
TT RR
CCC
TT (Transmitter PAD):
+: Gain
–: Loss
00
, 01-08, 81-88
RR (Receiver PAD):
00 , 01-08, 81-88
00 : 0 dB
01 : +2 dB
02 : +4 dB
03 : +6 dB
04 : +8 dB
05 : +10 dB
06 : +12 dB
07 : +14 dB
08 : +16 dB
81 : –2 dB
82 : –4 dB
83 : –6 dB
84 : –8 dB
85 : –10 dB
86 : –12 dB
87 : –14 dB
88 : –16 dB
Clear
CM12 Y=39/50
CM8A Y=5000-
5255: 173
CM0A Y=09
CMAD Y=29
(Virtual CS/ZT
for WLAN)
NOTE 1: When setting the PAD data for gaining to the high value, the echo and howling may occur.
NOTE 2: This data setting is valid to the group that is set to “XX” in the first data.
NOTE 3: When this data is set to the location number assigned by CM0A Y=09, there are conditions as follows.
• When using the PN-16VCTA-A card, the PAD data setting both of “Transmit” and “Receive” is
valid, but when using PN-16VCTA card, only the PAD data setting of “Receive” is valid.
• When using no 16VCT card, the PAD data for “Transmit” and “Receive” cannot be set to the gain
direction.
• The data setting of CM0A Y=23, 24 (PAD level of IP-PAD) is overwritten by this data.
NOTE 4: When using the PN-8IPLA card, set the second data in the range of 00 (0 dB) –07 (+14 dB) and
81 (–2 dB) –87 (–14 dB).
Continued on next page
DECEMBER/02/2005
CM67
To Next Page
Loading...
