Nordson Asymtek M-2000

Trainee Guide TR-L2-M2000
Level 2 Maintenance Training – M-2000 Dispensing Systems viii P/N 73-0018-00 (Revision B)
Course Master Schedule (Continued)
Lesson Topic Length Ratio
Module 4 Troubleshooting
4.1 Obtaining Asymtek Technical Support
4.2 XYZ Axis Failure
4.3 Pneumatic Failure
4.4 Conveyor Failure
4.5 Heater Failure
4.6 Scale Failure
4.7 Vision System Failure
4.8 Dispense Valve Failure
4.9 Height Sensor Failure
4.10 Needle Sensor Failure
4.11 Removing and Replacing Fuses
4.12 Communications Error
4.13 Testing the I/O Functions of the Dispenser and Conveyor
4.14 Reinitializing Conveyor Controller Memory
4.15 Reinitializing the PMAC
4.16 PMAC Plot
15 min
45 min
45 min
45 min
45 min
45 min
45 min
45 min
45 min
45 min
45 min
45 min
45 min
45 min
45 min
45 min
6:1
6:1
6:1
6:1
6:1
6:1
6:1
6:1
6:1
6:1
6:1
6:1
6:1
6:1
6:1
6:1
Module 5 Module and PCA Replacement
5.1 Removing and Replacing the Power Manager
5.2 Removing and Replacing the Conveyor Controller
5.3 Removing and Replacing the Temperature Controller
5.4 Removing and Replacing the Heater Relay Module
5.5 Removing and Replacing the PCA’s
45 min
45 min
45 min
45 min
45 min
6:1
6:1
6:1
6:1
6:1