Oce PlotWave 360 Operation Guide

Store print, copy, and scan jobs in the Smart Inbox
Introduction
In Océ Express WebTools, you can store your jobs in the Smart Inbox temporarily.
This way you can manage your jobs better, and reprint any job you like.
NOTE
• Storing jobs in the Smart Inbox is temporarily. When the time set in Océ Express WebTools is
expired, your jobs are deleted from the Smart Inbox.
• Note that when the Smart Inbox is full, the oldest jobs are deleted.
Store jobs in the Smart Inbox
Enable the preferred setting in Océ Express WebTools to store jobs in the Smart Inbox.
Setting Result
[Keep completed jobs in the Smart
Inbox]
Print jobs send from Océ Express WebTools are now
stored in the Smart Inbox.
[Keep copies of local print jobs in the
Smart Inbox]
Print jobs send from the user panel are now stored in
the Smart Inbox.
[Keep a copy of copy jobs in the
Smart Inbox (Public)]
Copy jobs are now stored in the Smart Inbox.
[Keep copy of scanned jobs in the
Smart Inbox]
Scan jobs are now stored in the Smart Inbox.
Procedure
1.
Open the [Preferences] - [System properties] tab.
2.
In the Job management section, select the preferred setting.
3.
Check the box to enable the setting.
4.
Click Ok.
Store print, copy, and scan jobs in the Smart Inbox
Chapter 3 - Define your Workflow with Océ Express WebTools
103

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches