Oce PlotWave 360 Operation Guide

Switch on the printing system
IMPORTANT
• Make sure the mains supply cable (A) is plugged in.
• Make sure the network cable (C) is plugged in.
Procedure
1.
Switch on the power switch at the left back of the printer (B).
A
B
C
2.
Press the on/off button at the front of the printer to start the system. The button lights up.
Switch on the printing system
256
Chapter 5 - Maintain the Printing System

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches