Oce PlotWave 360 Operation Guide

Use the Smart Inbox to send a print job
Introduction
When you have already added a job to the Smart Inbox in Océ Express WebTools you can print
this job via the Smart Inbox.
NOTE
For more information on how to create a Smart Inbox, see
Create and open a Smart Inbox for
print jobs (Smart Inbox section) on page 100 and Create and open a Smart Inbox for scan jobs
on page 102.
Procedure
1.
Select the [Jobs] tab in Océ Express WebTools.
2.
Click on 'Open Smart Inbox'.
3.
Click on the white field and select the correct Smart Inbox.
4.
Select the job and click [Print]. The job is copied into the queue.
Use the Smart Inbox to send a print job
174
Chapter 4 - Use the Printing System

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches