Oce PlotWave 360 Operation Guide

Step Action Remarks
3 Click on [Add file] and use the
Browse... button to select the file you
want to print.
Repeat this action to add more files
to the job.
You can only print documents with the follow-
ing data formats. When you use other formats,
the file cannot be sent to the printer.
• - HP-GL - .hp, .hpg, .hpgl
• - HP-GL/2 - .hp2
• - HP RTL - .rtl
• - CALS - .cls, .cal
• - NIRS - .nir, .nif
• - CalComp - .cc, .906, .907, .951, .crf, .pci
• - Edmics (C4) - .c4
• - TIFF - .tif
• - PostScript 3 - .ps (licensed)
• - PDF - .pdf (licensed)
• - JPEG - .jpg, .jpeg
• - DWF - .dwf
4
Select the [Preset] and change the
[Settings] if necessary.
Job settings that you change in Océ Publisher
Express always overrule the default settings
defined in the Océ Express WebTools.
5 In the [Workflow] section enter the
name of the Smart Inbox you want to
print to and click [Ok] to send the
print job to the Smart Inbox.
You can easily create a new Smart Inbox when
you enter a new Smart Inbox name.
Use Océ Publisher Express to send a print job
Chapter 4 - Use the Printing System
173

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches