Oce PlotWave 360 Operation Guide

Extended Print Jobs - Presets
Print presets on the user panel
Introduction
The printer uses the default presets for print, copy, and scan jobs, when you do not make
different settings. The print presets are divided into four categories:
• [Media]
• [Layout]
• [Image]
• [Finishing]
You can change the presets for all of these categories in Océ Express WebTools. For more
information on:
The preset concept
What you need to know about presets on page 125
How to change the preset
settings
Set the default print preset on page 126
Extended Print Jobs - Presets
Chapter 4 - Use the Printing System
191

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches