Oce PlotWave 360 Operation Guide

Save a scanned document on your mobile device
Introduction
When you have access to Océ Mobile WebTools you can scan a document on the printer and
save it on your mobile device.
Before you begin
Make sure you have a working connection.
Procedure
1.
Feed the original face up and centred on the original feeding table.
2.
Select the scan tile on the user panel. The scan Smart Access is visible.
3.
Select the preferred Smart Inbox in the Smart Access.
Tap the scan tile once more, when you want to change the settings.
4.
Tap the green button.
The scanned file is sent to the preferred Smart Inbox section, in Océ Express WebTools and in
Océ Mobile WebTools.
5.
Open Océ Mobile WebTools on your mobile device.
6.
Open the preferred Smart Inbox section. The scanned file is displayed here.
The Smart Inbox section is automatically refreshed within a few seconds.
7.
Select the file and click on the Save icon.
8.
Browse to a folder on your mobile device, and click Ok.
NOTE
The stored location or folder is sometimes determined by the browser on your mobile device.
Some mobile device browsers change the name, or the extension of the file while storing it.
Result
The file is stored on your mobile device.
Click the 'delete' icon, when you want to delete the file from the inbox on the printer.
Save a scanned document on your mobile device
Chapter 4 - Use the Printing System
229

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches