Basic Copy Jobs - Default
Advised settings for copy jobs
Introduction
A default copy job takes two steps: feed the original face up and tap the green button.
When you change the presets or the advanced settings, it is an extended copy job.
Advised settings for copy jobs
It is best to predefine the advised settings for copy jobs you do most often.
In the table below you find the advised settings for specific copy jobs. In most cases, the advised
settings give the best results.
Original document Original type Remarks
Monochrome CAD Drawings [Lines/text standard] or [Fol-
ded lines/text]
Folded coloured CAD drawing [Coloured original] For folded monochrome origi-
nals apply [Folded lines/text].
Coloured original, like CAD-
colour, maps, business graph-
ics, etc.
[Coloured original] The [Coloured original] mode
converts all colours, even
weak ones, to greyscale.
CAD drawings with marks
from marker pens
[Coloured original]
Photos and high definition col-
our prints
[Photo]
Medium quality colour prints [Coloured original];
Dark originals and dark trans-
parent originals
[Dark original] The renewed [Dark original]
setting is best for all CAD orig-
inals with varying background.
Diazo copies / "Chinese blue-
prints"
[Dark original]
Blueprints with white lines on
a blue background
[Blueprint] The image is inverted, that is
white is converted to black.
NOTE
For highlighting colour on an otherwise monochrome original, select the listed original type and
enable [Colour highlighting]. Enable [Colour highlighting] on the user panel under [All settings] -
[Image] - [Colour highlighting].
Basic Copy Jobs - Default
196
Chapter 4 - Use the Printing System
To Next Page
Loading...
Need help?
General
