Oce PlotWave 360 Operation Guide

Do a default copy job
Introduction
When you want to copy an original and you do not make any settings the default presets are
used. You only use the Smart Access to submit your job.
You can see the presets that are used in the job settings section of your job.
Procedure
1.
Feed the original face up and centred on the original feeding table.
The Copy tile with the copy Smart Access is automatically selected on the user panel.
2.
Select the number of copies and tap the green button.
Do a default copy job
54
Chapter 2 - Get to Know the Printing System

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches