Oce PlotWave 360 - Default Scan Job Settings

Disconnect the network cable and the mains supply cable
Procedure
IMPORTANT
Make sure the main power switch (A) is in 'off' position.
1.
Disconnect the network cable from the network connection at the right back of the printer (C).
C
2.
Disconnect the mains supply cable from the wall socket.
3.
Disconnect the other side of the mains supply cable from the power connection at the left back of
the printer (B).
A
B
Disconnect the network cable and the mains supply cable
248
Chapter 5 - Maintain the Printing System