Oce PlotWave 360 Operation Guide

Unpack the media roll
IMPORTANT
• Handle the media roll with care. A dented media roll can damage the printer.
• Always write the correct media name inside the core, after you unpack the media roll. In that
case you will have the correct media information available, when you replace the roll before it
is empty and you want to re-use it later,.
Procedure
1.
Place the media box on a table.
2.
Open the box, and if present remove the plug.
3.
Carefully remove the media roll from the box.
Unpack the media roll
Chapter 5 - Maintain the Printing System
261

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches