Oce PlotWave 360 Operation Guide

Move the Printing System
Switch the printing system off
Introduction
When you want to switch off the printing system completely, you have to take a few steps.
Procedure
1.
Use the [on / off button] at the front of the printer to switch the printing system off. The lighted
button starts to blink.
NOTE
You can also use the [Shut down] button in Océ Express WebTools.
IMPORTANT
Wait until the [on / off button] stops blinking.
2.
Switch off the [power switch] at the back of the printing system (A).
Move the Printing System
246
Chapter 5 - Maintain the Printing System

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches