Oce PlotWave 360 Operation Guide

Get a new license file
Introduction
The Océ applications and optional functions are protected against unauthorised use. You need to
activate licenses to enable various applications. Under the [Licenses] tab in Océ Express
WebTools you can upload new license files.
NOTE
After the license is uploaded you must restart your system to activate the license file.
Procedure
1.
Open the [Support] - [Licenses] tab to display the license information page.
2.
Note the license information down.
3.
Get the serial number of the machine, and note it down.
4.
Send the serial number and license information to your Océ representative together with a list of
options that you require.
5.
After receiving the license file store the file on the network.
Get a new license file
Chapter 6 - License Management
289

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches