Oce PlotWave 360 Operation Guide

Copy by set
Introduction
You can use the [Create set] option to make multiple sets of copies.
Procedure
1.
Feed the original face up and centred on the original feeding table.
2.
Tap the copy tile. A window with a list of presets opens.
3.
In the job pane on the right, tap [Create set].
The green button changes colour and displays [Add].
4.
Tap the green button to start scanning.
5.
When the printer releases the original, insert the next original.
6.
Tap the green button. The scan is added to the set.
Repeat this step until your set is complete.
7.
Tap the [Finish set] tile, to finish the set.
Result
The printer copies the set of originals.
Copy by set
Chapter 4 - Use the Printing System
201

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches