Oce PlotWave 360 Operation Guide

Print the print density chart
When to do
To influence the toner usage of your printer, you can print the print density chart and adjust the
print density offset. A negative value reduces the toner usage, a positive value increases the toner
usage.
Procedure
1.
Tap the system menu thumbnail. A window opens.
2.
In the list in the bottom right corner of the display, select [Test prints]. A wizard opens.
3.
Select [Print density chart].
4.
Tap Ok.
Result
A chart is printed.
Use the chart to change the print density in Océ Express WebTools, or via [Print density] on the
user panel. In order to change the print density settings, you must log in a Key operator or Power
user.
Print the print density chart
Chapter 8 - Support
319

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches