Oce PlotWave 360 Operation Guide

How to edit a setting
Introduction
In Océ Express WebTools you can make settings to personalise your printing system.
Procedure
1.
Browse to the settings group you want to edit, for example [Preferences] - [System defaults] -
[Regional settings].
2.
Click directly on the value of a setting, when you want to edit a single setting
or
click [Edit] in the settings group bar to access a window with all settings, when you want to edit
more settings in the group.
NOTE
Before you can edit a setting or a settings group, you must log in as an authorised user.
3.
Modify the settings.
4.
Click [Ok] to confirm, or [Cancel] to reject your entries.
How to edit a setting
82
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches