Oce PlotWave 360 Operation Guide

Scan a photo to JPEG format
Introduction
When you want to scan a photo to JPEG format, you can select the presets on the user panel.
Procedure
1.
Feed the original face up and centred on the original feeding table.
2.
Tap the scan tile on the user panel and select your preferred location in the scan Smart Access.
When you do not select a location the file is sent to the public Smart Inbox.
3.
Tap the scan tile again. A window with a list of presets opens.
4.
Tap the [File type] preset.
5.
Select[JPEG].
6.
Tap the [Image] preset.
7.
Select [Photo].
8.
Tap the green button.
Result
A scan to JPEG file is made, and sent to your preferred location. Default you can find your file in
the public Smart Inbox in Océ Express WebTools.
Scan a photo to JPEG format
224
Chapter 4 - Use the Printing System

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches