Oce PlotWave 360 Operation Guide

Media sizes
Introduction
Océ machines and media are matched for the best quality and performance. Océ recommends
the use of approved Océ media. You can receive a list of media (that includes plain or recycled
paper, transparent paper, coloured papers, and different polyester films) from your local
representative.
IMPORTANT
Do not store paper in rooms where temperature and humidity are high. In a recommended
environment, with best print quality, temperature is not higher than 27 degrees Celsius or 80
degrees Fahrenheit and relative humidity is between 30 to 60 percent. Avoid dust and direct
sunlight. Wrap non-used paper in plastic to prevent it from absorbing moisture.
Media sizes
ISO A (DIN) range
Media Width [mm] Length [mm]
A3 297 420
A2 420 594
A1 594 841
A0 841 1189
ISO B (DIN) range
Media Width [mm] Length [mm]
B2 500 707
B1 707 1000
Carto B range
Media Width [mm] Length [mm]
CartoB2 500 700
CartoB1 700 1000
ANSI range
Media Width [inch] Length [inch]
B 11 17
C 17 22
D 22 34
E 34 44
ARCH range
Media
Width [inch] Length [inch]
B+ 12 18
4
Media sizes
Chapter 5 - Maintain the Printing System
273

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches