Oce PlotWave 360 Operation Guide

Print from your mobile device
Introduction
When you have access to Océ Mobile WebTools you can print a file from your mobile device on
the printer .
NOTE
• You can navigate in a file repository on your mobile device. If needed, install a file explorer
application. For more details refer to the Océ website.
• Make sure you have a working connection.
• When the system requires accounting information, your print job is sent to the Smart Inbox
named [Mobile] in Océ Express WebTools. It is not printed. Connect to Océ Express WebTools
from a workstation. Enter the accounting information in order to print the job.
Illustration
Procedure
1.
Go to the [Print] section, and select [New job].
The [Print job] window opens.
2.
Click on [Select a file].
3.
Browse to the file you want to print and click Open.
4.
Define the settings for your print job and click Ok.
5.
After you have defined your settings, click on the printer icon in the upper right hand corner. The
job is sent to the printer.
Result
Your document is printed. Your print job appears on the user panel and in the job queue of Océ
Express WebTools, while it is being printed.
Print from your mobile device
182
Chapter 4 - Use the Printing System

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches