Oce PlotWave 360 Operation Guide

Introduction
Océ Express WebTools
Introduction
Océ Express WebTools is an application that runs embedded on your printer. You can use an
Internet browser (Microsoft
®
Internet Explorer or Mozilla Firefox) to open the homepage of Océ
Express WebTools on your computer or mobile device.
Definition
You can use Océ Express WebTools to:
• Send print jobs to the printer with Océ Publisher Express.
• Access the settings to manage the configuration and preferences of the printing system.
When you want to change settings in Océ Express WebTools, you must log in with one of three
predefined user roles. For more information, see User roles and authorisations on page 107.
• Monitor the status of the printing system.
How to access Océ Express WebTools
To access Océ Express WebTools:
• Enter the product name of the printer as a Hostname, for example http://PlotWave3XX, in the
workstation web browser.
or
• Enter the printer's IP address, for example http://123.123.23.123, in the workstation web
browser.
NOTE
When Océ Express WebTools does not appear, contact the network administrator to check the
network parameters. Check if the printer's network settings have been registered in the network
infrastructure.
Introduction
64
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches