Oce PlotWave 360 Operation Guide

Define the IP type
Introduction
Next to IPv4 the printer also supports IPv6. You can choose to use either IPv4 or IPv6, but Océ
Express WebTools also allows you to use both simultaneously. For more information on the
differences between IPv4 and IPv6, please consult the Connectivity manual.
Procedure
1.
Open the [Configuration] - [Connectivity] tab.
2.
Click on [IP type] under the [Network adapter] settings.
3.
Choose between [IPv4], [IPv6] or [IPv4 and IPv6 both enabled].
4.
Click [Ok] to confirm your entry.
Define the IP type
112
Chapter 3 - Define your Workflow with Océ Express WebTools

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches