Oce PlotWave 360 Operation Guide

Print a test print
When to do
Print a test print from a specific roll at the request of the Océ Helpdesk. The test print provides
information that can help to solve quality problems.
Procedure
1.
Tap the system menu thumbnail on the user panel. A window opens.
2.
In the list in the bottom right corner of the display, select [Test prints]. A wizard opens.
3.
Select the roll you want to print from.
4.
Tap Ok.
Print a test print
318
Chapter 8 - Support

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches