Oce PlotWave 360 - Connect the Mains Supply Cable and the Network Cable

Connect the mains supply cable and the network cable
Procedure
IMPORTANT
Make sure the power switch (B) is in 'off' position.
1.
Plug the mains supply cable into the power connection at the left back of the printer (A).
A
B
C
2.
Plug the other side of the mains supply cable into the wall socket.
3.
Plug the network cable into the network connection at the right back of the printer (C), to connect
the printer to your company network.
Connect the mains supply cable and the network cable
Chapter 2 - Get to Know the Printing System
23