Oce PlotWave 360 Operation Guide

Remove a media roll
IMPORTANT
• Handle the media roll with care. A dented media roll can damage the printer.
• Do not open the media drawer during the printing process.
CAUTION
• Watch your fingers when you handle the media roll.
• When you want to remove an A0 media roll from position 2 make sure to bend your knees, as
indicated below, to spare your back.
Illustration
Procedure
1.
Pull firmly on the media drawer to open it.
Remove a media roll
258
Chapter 5 - Maintain the Printing System

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches