Oce PlotWave 360 Operation Guide

Error message Action to perform
The external location is full. Make some space available on the external location for the
'Scan to' operations.
The test of the external location
cannot be performed: an inter-
nal error has occurred.
Restart the system and try again.
Troubleshoot the creation of an FTP external location (after an error message)
Chapter 3 - Define your Workflow with Océ Express WebTools
143

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches