Oce PlotWave 360 Operation Guide

Preset category: [Layout]
Setting Settings values Function
[Cut size] [Cut method]:
• [Synchro]
• [Standard]
• [Custom]
When set to [Synchro], the print is cut depen-
ded of the image.
When set to [Standard], the print is cut to a
standard media size.
When set to [Custom], you must enter the
sizes manually.
[Add a leading strip] Adds a blank strip at the beginning of the out-
put.
From 0 to 400 mm, or 0 to 16 inches.
[Add a trailing strip] Adds a blank strip at the end of the output.
From 0 to 400 mm, or 0 to 16 inches.
[Rotation] [Automatic media saving]
[0°]
[90°]
[180°]
[270°]
Rotates the image counter-clockwise.
Select [Automatic media saving] to use the
media in the most efficient way.
4
Advanced settings for print jobs
Chapter 4 - Use the Printing System
193

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches