Oce PlotWave 360 Operation Guide

Preset Settings values Settings values Function
[Image] [Colour highlight-
ing]
[On]
[Off]
When enabled all coloured informa-
tion is printed darker on the original
than black/grey information. For in-
stance, marked or highlighted text
becomes more visible.
NOTE
It is only relevant for the
copy modes: [Coloured
original], [Lines/text stand-
ard], [Lines/text draft], [Fol-
ded lines/text], [Dark origi-
nal].
[Lighter/Darker] Value from -5 to 5 [Increase the value for darker prints;
decrease for lighter prints.]
[Mirror] [On]
[Off]
[When 'on', the image is mirrored
along the vertical axis (the media
transport direction). ]
[Stamp] Select a stamp
from the list.
NOTE
For more in-
formation
on how to
create a
stamp, see
Create a
stamp
on
page 132
Copy with a stamp
4
Advanced settings for copy jobs
Chapter 4 - Use the Printing System
207

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches