Oce PlotWave 360 Operation Guide

2
8.
If necessary, press the [clean cut button] to trim a strip of the new media roll. Press once for a
strip of approximately 20 cm, or hold the button and release it when the strip has the desired
length.
9.
Close the media drawer.
NOTE
Do not open the media drawer during loading.
10.
The user panel displays the message that new media is detected. Follow the steps in the wizard
to define the correct media type and size, when not detected automatically.
Load a media roll (position 2)
270
Chapter 5 - Maintain the Printing System

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches