Oce PlotWave 360 Operation Guide

Event message Troubleshoot
[Print settings conflict: the document
is identified and printed with the set-
tings embedded in the file]
The print job contains a non-supported structure of em-
bedded Océ Job Tickets. The settings you have selected
in the submission application are not used. Instead, the
Océ Job Ticket settings embedded in the file are used for
printing and identification of the job. The job will appear
in the print queue and the Smart Inbox with its original
name.
• If the settings embedded in the file contain a Smart In-
box name, the job will be kept in that Smart Inbox.
• If the settings embedded in the file do not contain a
Smart Inbox name, the job will be kept in the default
Smart Inbox defined in the [System defaults] - [Job
management].
• If you do not want to use the original settings embed-
ded in the file, use Océ Publisher Select to print the
job.
Event messages
304
Chapter 8 - Support

Oce PlotWave 360 Specifications

General

Print Technology	Océ Radiant Fusing technology
Resolution	600 x 1200 dpi
Maximum Media Width	36 inches
Print Speed	6 A1/D prints per minute
Media Handling	2 rolls
Warm-up Time	Instant On
Weight	195 kg
Media Width	Up to 36 inches