Omron Sysmac NY-series User Manual

Manual name Cat. No. Model numbers Application Description
NY-series
IPC Machine Controller
Industrial Panel PC
/ Industrial
Box PC
Built-in EtherCA
T
®
Port User’s
Manual
W562
NY532-££££
NY512-££££
Using the built-in
EtherCAT port in an
NY-series Industrial
PC.
Information on the built-in EtherCAT port is
provided.
This manual provides an introduction and
provides information on the configuration,
features, and setup.
NY-series
IPC Machine Controller
Industrial Panel PC
/ Industrial
Box PC
Built-in EtherNet/IP
™
Port Us-
er
’s Manual
W563
NY532-££££
NY512-££££
Using the built-in
EtherNet/IP port in
an NY-series Indus-
trial PC.
Information on the built-in EtherNet/IP port
is provided.
Information is provided on the basic setup,
tag data links, and other features.
NJ/NY-series
NC Integrated Controller
User
’s Manual
O030 NJ501-5300
NY532-5400
Performing numerical
control with NJ/NY-
series Controllers.
Describes the functionality to perform the
numerical control.
NJ/NY-series
G code
Instructions Reference Man-
ual
O031 NJ501-5300
NY532-5400
Learning about the
specifications of the
G code/M code in-
structions.
The G code/M code instructions are descri-
bed.
NY-series
T
roubleshooting Manual
W564
NY532-££££
NY512-££££
Learning about the
errors that may be
detected in an NY-
series Industrial PC.
Concepts on managing errors that may be
detected in an NY-series Controller and in-
formation on individual errors are described.
Sysmac Studio Version 1
Operation Manual
W504 SYSMAC
-SE2£££
Learning about the
operating procedures
and functions of the
Sysmac Studio.
Describes the operating procedures of the
Sysmac Studio.
CNC Operator
Operation Manual
O032
SYSMAC-RTNC0£
££D
Learning an introduc-
tion of the CNC Op-
erator and how to
use it.
An introduction of the CNC Operator, instal-
lation procedures, basic operations, con-
nection operations, and operating proce-
dures for main functions are described.
NX-series
EtherCA
T
®
Coupler Unit
User’s Manual
W519
NX-ECC£££
Learning how to use
the NX-series Ether-
CAT Coupler Unit
and EtherCAT Slave
Terminals.
The following items are described: the over-
all system and configuration methods of an
EtherCAT Slave Terminal (which consists of
an NX-series EtherCAT Coupler Unit and
NX Units), and information on hardware,
setup, and functions to set up, control, and
monitor NX Units through EtherCAT.
Related Manuals
23
NY-series Motion Control Instructions Reference Manual (W561)

Omron Sysmac NY-series Specifications

General

Brand	Omron
Model	Sysmac NY-series
Category	Control Unit
Language	English