Introduction
Thank you for purchasing an NY-series IPC Machine Controller Industrial Panel PC / Industrial Box
PC.
In this manual, the Industrial Panel PCs and Industrial Box PCs may be collectively referred to as “NY-
series Industrial PCs”. In this manual, the range of devices that are directly controlled by the Controller
functions embedded in the Real-Time OS in the NY-series Industrial PC may be expressed as the
Controller.
This manual describes the motion control instructions. Please be sure that you sufficiently understand
the operations and handling procedures, and use the Motion Control Function Module (abbreviated as
“MC Function Module”) correctly.
Use this manual together with user's manuals for the NY-series Controller.
When you have finished reading this manual, keep it in a safe location where it will be readily available
for future use.
Intended Audience
This manual is intended for the following personnel, who must also have knowledge of electrical sys-
tems (an electrical engineer or the equivalent).
• Personnel in charge of introducing FA systems.
• Personnel in charge of designing FA systems.
• Personnel in charge of installing and maintaining FA systems.
• Personnel in charge of managing FA systems and facilities.
For programming, this manual is intended for personnel who understand the programming language
specifications in international standard IEC 61131-3 or Japanese standard JIS B 3503.
Applicable Products
This manual covers the following products.
• NY-series IPC Machine Controller Industrial Panel PC
• NY532-15££
• NY532-14££
• NY532-13££
• NY532-5400
• NY-series IPC Machine Controller Industrial Box PC
• NY512-15££
• NY512-14££
• NY512-13££
Part of the specifications and restrictions for the products may be given in other manuals.
Refer to Relevant Manuals on page 2 and Related Manuals on page 22.
Introduction
1
NY-series Motion Control Instructions Reference Manual (W561)
To Next Page
Loading...
Need help?
General
