Parker AC30 series User Manual

8-16 Ethernet
AC30 series Variable Speed Inverters
Services Page
The Services page allows the Web Password to be changed. The password provides a means of restricting access to the web pages using
Basic Authenticate. By default the password is cleared providing unrestricted access.
The username is fixed to “ac30”.
Note 1. Basic Authenticate is a very low level of defence against unauthorized access. It is the responsibility of the system administrator to
assess the network security and provide adequate protection.
Note 2. The username and password are case sensitive.
Note 3. If passwords are lost, they may only be cleared by a return to defaults of all the parameters.
Put the inverter into operational
or configuration mode
Change parameter
web view level
Parameter menu
navigation bar
Inverter
status
Refresh parameter
values
Enable / disable continual
monitoring of parameters
Application
status

Parker AC30 series Specifications

General

Control Modes	Closed-loop vector
Feedback	Encoder
Operating Temperature	0 to 40°C (32 to 104°F) standard, -20 to 50°C (-4 to 122°F) with derating
Protection	Overcurrent, Overvoltage, Undervoltage
Communication	RS485